Haier HBQ18JADLS Product Manual - Page 6
Installing Your Refrigerator
View all Haier HBQ18JADLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English Installing Your Refrigerator Unpacking Your Refrigerator 1. Remove all packaging material. This includes the foam base, all adhesive tape holding, refrigerator accessories inside and outside, and the plastic stoppers holding the shelves. Slide out and remove plastic or foam guard used to secure the compressor from shipping damage due to vibration and shock. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator. Adjusting Your Refrigerator Leveling Your Refrigerator: • Your refrigerator has two leveling legs, which are located in the front comers of your refrigerator. After properly placing your refrigerator in its final position, you can level your refrigerator. • Levering legs can be adjusted by turning them clockwise to raise your refrigerator or by turning them counterclockwise to lower your refrigerator. The refrigerator door will close easier when the leveling legs are raised. Proper Air Circulation • To assure your refrigerator works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation, plumbing and electrical connections. • The following are recommended clearances around the refrigerator: Sides 3/4 "(19mm) Top 2" (50mm) Back 2" (50mm) 5