Haier HBU-24H03 User Manual - Page 16

GUIDE TO OPERATION TIMER ON-OFF (1)After unit start, select your desired operation mode Operation mode will be displayed on LCD. Power indicator on indoor unit lights up. (2)Press TIMER button to change TIMER mode Every time the button is pressed, display changes as follows: ON TIMER ON OFF TIMER OFF ON OFF TIMER ON-OFF blank Select TIMER ON-OFF, "ON" will flash. (3)Time setting for TIMER ON Press HOUR button. Every time the button is pressed, time increases 10min. If button is kept depressed, time will change quickly. Every time the button is pressed, time decreases 10min. If button is kept depressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24hours. AM refers to morning and PM to afternoon. (4)Time confirming for TIMER ON After time setting, press TIMER button to confirm. "ON" stops blinking, While "OFF" starts blinking. Time displayed: Unit starts at Xhour X min. NO AM FFO PM SWING TEMP ON OFF FAN 1 MODE 3 CLOCK SET TIMER SLEEP 6 2 LOCK 4RESET 5 (5)Time setting for TIMER OFF Follow the same procedures in "Time setting for TIMER ON". (6)Time confirming for TIMER OFF After time setting, press SET button to confirm "OFF" stops flashing. Time displayed: Unit starts at Xhour X min. To cancel TIMER mode Just press TIMER button several times until TIMER mode disappears. According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-Stop or Stop-Start can be achieved. 14