Haier HDC10LBS Product Manual - Page 7
Before Using For The First Time, Operation - coffee maker
UPC - 688057393902
View all Haier HDC10LBS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English BEFORE USING FOR THE FIRST TIME 1. Unpack the unit. 2. Check the contents against the accessories list. 3. Remove all labels and the protective film. 4. Select a suitable location for the unit on a flat, stable surface close to a power outlet. Check to ensure all accessories are included and the unit is not damaged. Be sure the filter and filter basket are assembled properly. Before your first brew cycle, you will need to cycle the unit twice with water to remove any sediment. Brew clean water by filling the reservoir up to the MAX marker and follow the steps below (but do not use ground coffee at this time), then pour the cycled water out of the carafe. Repeat 2 times. Remove and Clean carafe, Lid, Filter and filter basket thoroughly with warm water. OPERATION Making Coffee 1) Open the flip up lid of coffee maker, use the carafe to fill the water reservoir with cold water. Watch the left or right water level indicator for your desired fill level. The water level should between the MAX and MIN. 2) Place the filter basket in the filter basket in the unit. Make sure it is properly seated. Then place the filter into the filter basket. 3) Add ground coffee to filter. One level tablespoon for every cup is recommended, but you may adjust according to your personal taste. 4) Place the carafe on warming plate. Note: Please make sure the carafe is properly seated on to the warming plate. 5) Plug the power cord into the outlet, the LCD will display "AM 12:00" (fig.1). 6) Press the "ON/OFF" button, the "RUN" indicator lamp will now be illuminated. The brewing cycle will now begin. 6