Haier HDW101WHT User Manual - Page 12
Washing dishes
View all Haier HDW101WHT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Washing dishes Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence and consumption details are shown in the right half of the overview. For example: Use the "Heavy Wash" programme for dishes and utensils which have plenty of food remains stuck on hard. Earn savings If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates at the next lowest temperature will usually be sufficient. Programme data The stated programme data are based on standard operating conditions. The values can vary considerably according to: different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine-related factors (e.g. temperature, water volume,...) Turning on the Appliance Starting a wash cycle... Make sure that the plug for the appliance is inserted into the wall socket. Make sure that the water supply is turned on to full pressure. Load the dishes. Pour in the detergent. Press the ON-OFF button, and the "End" light will turn on. Turn the knob located on the right of the control panel until the number or symbol for the cycle setting is aligned with the refrence mark (see the section entitled, program overview).If the knob rightly aligned with the refrence mark you want to choose, you must turn the knob to with the mark of "Reset" .Then back to the number or symbol of the program you want to choose. After five seconds the "End" light will turn off, the wash cycle will begin. Note: When washing, the knob will not rotate itself. 11