Haier HH-S901GS User Manual - Page 15

CLEANING AND MAINTENANCE Cleaning and maintenance preparation 1. Before cleaning or maintaining the range hood, be sure to remove the power plug 2. Please wear rubber gloves when cleaning or maintaining, in case the metal parts hurt people quickly. 3. When cleaning and maintenance, take off the parts and put them gently to avoid deformation. 4. Please clean and maintain the range hood regularly according to your usage frequency and surrounding environment. Cleaning main body 1. After using the range hood everyday, should wipe advocate airframe surface. 2. To protect the coating on the surface of the body, please use neutral detergent and soft cloth when wiping, do not use such as toothpaste, washing brush and other bristle brush. 3. Do not use gasoline, alcohol and other corrosive chemical reagents or toothpaste, detergent, washing powder and other detergent with grinding function to wipe the surface Oil cup Hold the oil cup with both hands horizontally and pull it outward to remove the oil cup. When the oil stored in the oil cup reaches a certain amount, it shall be cleaned in time to prevent overflow. Clean oil guide plate 1. First, open the glass panel, and then hold the oil guide plate with both hands to push upward, the oil guide plate can be taken down;(figure 4) 2. It will be better to use warm water anddetergent immersion for a period of time to wash the oil guide plate , the oil guide plate with a cloth to wipe clean, and then rinse again with water can be; 3. Every day after using the range hood , wipe the outer surface of the oil guide plate lightly. It is recommended to clean the inside of the oil guide plate once a week. Clean the impeller 1. Special care should be taken when cleaning the impeller. Do not collide or throw away the clamp on the blade, so as to prevent the dynamic balance of the impeller from getting worse and causing vibration and noise of the whole machine; 2. It is recommended to clean the impeller every three months. 11