Haier HL40XSL2 User Manual - Page 12
HDMI and DVI input
UPC - 688057325309
View all Haier HL40XSL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation output analog and digital RGB simultaneously, connect only one of either VGA IN or HDMI IN to display the VGA on the TV. •• If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA or HDMI; (the other mode is set to Plug and Play automatically by the TV.) C Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required. YYResolution Mode Resolution VGA SVGA 640×480 800×600 XGA 1024×768 Frame frequency (Hz) 60 Hz 60 Hz 75 Hz 60 Hz 75 Hz PC PC/DVI AUDIO PC IN Back of TV How to use A Turn on the computer and the TV. B Use INPUT on the remote control to select VGA or HDMI source. C Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGA graphic card can not be changed, change the VGA graphic card or consult the manufacturer of the VGA graphic card. Note RR Use a DVI cable. RR Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. RR The synchronization input form for Horizontal and Vertical frequencies is separate. HDMI and DVI input When the source device (DVD player or Set Top Box) supports HDMI How To Connect A Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product). B No separated audio connection is necessary. How To Use •• If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280×720 p. •• If the source device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280×720 p. •• Select HDMI input source in input source option of Select Main source menu. When the source device (DVD player or Set Top Box) supports DVI How To Connect A Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable (not supplied with this product). B A separated audio connection is necessary. C If the source device has an analog audio output connector, connect the source device audio output to DVI Audio In port located on the left side of HDMI port. EN-11 Haier LED HDTV