Haier HL42XR1 Owners Manual - Page 35

Remote Control Operation 5. When thedevice turns ON,press and releaseENTER key to programthe remote withthe new code, saving the code andexit. To exit withoutprogramming, press anykey other except CH+/CH- and ENTER. LED will be off after manually scan mode is exit. 6. If thedevice responds, nofurther programming isrequired. If thedevice does notrespond, repeat step 1through 5.And searchingwill start fromcurrent code set. If no keywas pressed in 30seconds, manually scanmode will beautomatically exit. 7. Aftersearching the entiredata blink for 3times. base, thismode will beautomatically exited andled will Automatic Scan Programmingthe Remote Toautomatic scan programthe remote: 1. Manually turnOFF the deviceyou wish topower scan. (TV, DVD, VCR, STB, cable boxor audio equipment). 2. Press SELECT key to choosethe device youwish to program. While Press and holding ENTER key, press SELECT key and device LED will be ON. Keep the status forabout 5 seconds,release both keysand then LEDwill blink twiceper second, indicating that theControl is readyfor programming. 3. Press and release MUTE key to enterautomatic scan mode. And the remote will automatically sending powercodes to thedevice. 4. When thedevice turns ON, press ENTER key to programthe remote with the newcode, saving it and exit. To exit without programming, press anykey other except ENTER key. 5. If thedevice responds, nofurther programming is required, if thedevice does notrespond, repeat steps 1 through 4.And search will start from currentcode set. 6. Aftersearching for 3 times. the entiredata base, thismode will beautomatically exited andled will blink Punch-Through Features The remote providestwo punch-through DVD or VCRoperation while theremote another device. featuresthat is inanother allow usersto controITV volume and device modecontrol certain featuresof Volume Punch-Through: The TVVolume/Mute punch-throughfeature allows youto control thevolume of yourTV while the remote is in anotherdevice mode. The feature isapplicable and brands thatdo not usethe volume control buttons for otherpurposes. and mutefunction for all devices Transport Key Punch-Through: The DVD orVCR transport keypunch REWIND, FF and RECORD functions modes. Thefeature is applicablefor for other purposes. through featurelets you remote the PLAY, STOP, PAUSE, of your DVD orVCR while the control operates in other all devicesand brands thatdo not usethe transport keys Protection mode 1. While pressand holding ENTER, press FREEZE key for 5seconds to enterprotection mode. In this mode, allthe above programmingmethods will beinvalid. 2.To exit protection:While press andholding ENTER, press FREEZE key. Current device related LED remains ONand then releaseENTER and FREEZE. Input three digit password"8 8 8", LED turns off and protection mode is ended. If error password is input or no password input in 10 seconds, LED blinksthree times andthen turns off. Protection modewill remain. Display mode 1.To enter displaymode, while pressand holding ENTER key, press SELECT key and device LED will beON, keep thestatus for about5 seconds. Release both keys andthen LED will blink 2 timesper second, indicating remote is ready forprogramming. 2.Sequence press9, 8, 0to enter displaymode. And LED is off now. 3.Press digit 1 key toget the firstdigit of current code set. Forexample, if thefirst digit ofcode set is 1,so then ledwill blink onceand remains OFE Digit 0 in code setwill not bedisplayed. Blink twice persecond. 4.Press digit2 key toget the seconddigit of currentcode set. Forexample, if thesecond digit of code setis 3, sothen led willblink three timesand remains OFE Blink twiceper second. 5.Press digit3 key toget the thirddigit of currentcode set. Blinktwice per second. 6.Only digit 1,2, 3are valid inthis mode.And the sequenceis not fixed. You can repeat, ifyou don't remember clearly. 7.Remote will not send out data in this mode if user presses any keys other than digit 1,2, 3. And thiscan be regardedas no keypressed. 8.1fnokeywaspressedin mode is ended. 10secondsoranykeyotherthandigitl,2,3ispressed, display Owner's Manual 35