Haier HL46XSL2 User Manual - Page 28
Universal Remote Control
UPC - 688057325330
View all Haier HL46XSL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Universal Remote Control Video. C Press / // button to select desired video folder, and then press ENTER button to enter the play interface. 1. Play Time 4. Shuffle On or Off 2. File Name 5. Audio Only 3. Repeat 6. Information D Press MENU button to display the option list. 1. Play/Pause 4. Picture Mode 2. Repeat 5. Screen Mode 3. Show Info E Press the button on the remote control to select the adjusted item, press ENTER button to confirm. 12 USB PLAY/PAUSE STOP REC REV PREV NEXT REPEAT 1. Play or pause 2 Stop 3. Fast reverse 4. Repeat 5. Fast forward 34 5 6 7 6. Play previous music 7. Play next music F Press EXIT button to return to the previous menu. Press USB button to exit the USB mode. Note R Do not remove USB device from the TV until you have exited the USB mode otherwise you may damage the USB device. Universal Remote Control Setting Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, DVD, VCR, SETBOX, CABLE or AUDIO. Note R The remote control might not be compatible with all DVD Players, VCRs and Cable boxes. Control Operation A Program the Controller to work with your device. B Changing device mode by pressing the TV, DVD, STB, CABLE, VCR, AUD key. When device is set, related device LED will be on for 1 second and then be off. C Aim the remote at the device. D Use the other Controller buttons to operate the device. Device LED will blink if user presses any key (if the key has data in current mode.). If the key has no data, then LED will not blink. E Default init status: TV/Haier codeset. Y Manually Programming the Control Check the code no. from the code list. A Choose the device you want to program. B While Press and holding ENTER key, press INPUT key, and device LED will be ON. Keep the status for about 3 seconds and the LED will blink, indicating that the Controller is ready for programming, then release both keys. C Led will blink once when you enter a digit key, indicating the digit key is programmed. If 3 digits are programmed successfully, device LED will be ON for about 3 seconds and then blink twice per second. Then User now can: A)Try to operate the device by using power key. B) If operation can be done, press ENTER key to save current 3-digits code brand to EEPROM and exiting manually programming mode. C)Return to beginning of step 3. Reprogram the control. EN-27 Haier LED HDTV