Haier HLC22XSLW2a User Manual - Page 14
Function Menu Options
View all Haier HLC22XSLW2a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Pause, Fast Forward, Rewind). Play Pause Fast forward Fast reverse 3.Playback speed: playback speed can be changed 1x,2x,4x,8x,16x,32x. 4.Playback position: The playback position is always at the center of the time bar. 5.Time scale:shows the time in half hour increments. Note R Time Shift function is only available in DTV mode. R The maximum recording duration is determined by the memory size of the USB drive and the signal resolution. Please use a high-speed USB 2.0 drive with a minimum of 1GB capacity. R Time shift only supports FAT32 file-system. R Time shift supports more than 4GB recording by using multi-file storage. R When the maximum recording duration is reached, the oldest program would be deleted and the latest program is recorded. R When changing channel or changing input source, the timeshift would stop automatically. R Time shift record will store the fact of no signal. R Time shift will store the video, audio and data service. we only support: Video streams: Max 1 stream Audio streams: Max 8 streams CC stream: No limited. R In recording, the data is not guaranteed to be stored in the disk. If the timeshift playback plays a corrupted data block, it would show "Data lost" message to indicate that the current data is not stored correctly. R Please connect the TV antenna or Cable TV coaxial cable to the Antenna input on the TV. Then please complete the channel scan. The Time Shift feature is available when using your ATSC tuner and QAM cable tuner. Function Menu Options A Press MENU button and / button until the following menu appears on the screen. Video Audio Channel Function Lock Language OSD Timeout OSD Transparency Screen Mode DPMS Blue Screen DCR Time Setup Closed Caption Default English Short Middle Normal On On On Function / Select EXIT Back Operation B Press/ ENTER button to enter the menu and / button to go up and down to select the desired option. C Press/ ENTER button to confirm and /button increase and decrease the level to adjust the selected option to your preference. D Repeat step 2 and step 3 until desired quality has been achieved. Function Y Language:Press/ button to select language of the OSD. Y OSD Timeout: Press/ button to select Middle /Short and Long to change thetime of the OSD display. Y OSD Transparency: Press/ button to select among Low/High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity. Y Screen Mode: Press VOL+/- button to select among Normal/Wide/Zoom and Cinema to change the display mode(display mode may differ from different inputs). Y DPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically. Y Blue Screen: Press/ button to select On, the screen will be in blue after 3 seconds if there is no signal. Y DCR: Press/ button to select On or Off. Y Time Setup: Press/ ENTER button to enter the submenu. q Time Zone: Press/ button to select the appropriate time zone. Video Time Zone Date/Time Audio Sleep Timer Off Channel Function Lock Time Setup / Select EXIT Back Haier LED HDTV/DVD EN-14