Haier HMC1285SESS HMC1285SESS Manual - Page 15

Operation Instructions

Page 15 highlights

ENGLISH OPERATION INSTRUCTIONS SETTING THE CLOCK When you first plug in your microwave, you must first set the time. 1. Plug in the microwave. 2. Turn the Dial to select hours. 3. Press the Start/+30 sec/Select button. 4. Turn the Dial to select minutes. 5. Press start/+30 sec/select button to finish. To reset the clock: 1.Press the Timer/Clock button twice. 2. Turn the Dial to select hours. 3. Press the Start/+30 sec/Select button. 4. Turn the Dial to select minutes. 5. Press Start/+30 sec/select button to finish. NOTE:  1. You can use the oven without setting the clock 2. The oven uses a 12-Hour clock. 3. The clock will keep the time of day as long as the oven is plugged in and electricity it provided. QUICK 30 SECONDS The Start/+30sec/Select button can be used to set the time for cooking or for adding extra cooking time while food is already cooking. NOTE: The microwave's power level is automatically set to 100% 1. To set the time for cooking, press Start/+30sec/Select button and the oven will begin cooking for 30 seconds. 2. To add extra cooking time during cooking, press the Start/+30sec/ Select button during cooking this will increase cooking time by 30 seconds. The maximum amount of time that can be added is 95 minutes. STOP / CLEAR 1. To stop the microwave at any point during cooking, press the Stop/Clear button. SETTING THE POWER LEVEL Variable power levels add flexibility to microwave cooking. Each power level gives you microwave energy a certain percent of the time, for example, Power Level 3 is microwave energy 30% of the time. Power Level 10 will cook faster but food may need more frequent stirring, rotating or turning over. A lower setting will cook more evenly and need less stirring or rotating of the food. Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes. Rest periods (when the microwave energy cycles off) give time for the food to transfer heat to the inside of the food. An example of this is with the defrost cycle (Power Level 3). If the microwave energy did not cycle off, the outside of the food would cook before the inside was defrosted. 1.Press the Power Level button. 2. Turn the dial to select the power level. 3. Press the Start/+30 sec/Select button to enter. PAGE 13 • SET UP & USE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

SETTING THE CLOCK
When you first plug in your microwave,
you must first set the time.
1. Plug in the microwave.
2. Turn the Dial to select hours.
3. Press the Start/+30 sec/Select
button.
4. Turn the Dial to select minutes.
5. Press start/+30 sec/select button
to finish.
To reset the clock:
1.Press the Timer/Clock button twice.
2. Turn the Dial to select hours.
3. Press the Start/+30 sec/Select
button.
4. Turn the Dial to select minutes.
5. Press Start/+30 sec/select button
to finish.
NOTE
:
1. You can use the oven without setting
the clock
2. The oven uses a 12-Hour clock.
3. The clock will keep the time of day
as long as the oven is plugged in and
electricity it provided.
QUICK 30 SECONDS
The Start/+30sec/Select button can be
used to set the time for cooking or for
adding extra cooking time while food is
already cooking.
NOTE:
The microwave’s power level is
automatically set to 100%
1. To set the time for cooking, press
Start/+30sec/Select button and
the oven will begin cooking for 30
seconds.
2. To add extra cooking time during
cooking, press the Start/+30sec/
Select button during cooking this will
increase cooking time by 30 seconds.
The maximum amount of time that
can be added is 95 minutes.
STOP / CLEAR
1. To stop the microwave at any point
during cooking, press the Stop/Clear
button.
SETTING THE POWER LEVEL
Variable power levels add flexibility to
microwave cooking. Each power level
gives you microwave energy a certain
percent of the time, for example, Power
Level 3 is microwave energy 30% of the
time. Power Level 10 will cook faster but
food may need more frequent stirring,
rotating or turning over. A lower setting
will cook more evenly and need less
stirring or rotating of the food. Some
foods may have better flavor, texture or
appearance if one of the lower settings
is used. Use a lower power level when
cooking foods that have a tendency to
boil over, such as scalloped potatoes.
Rest periods (when the microwave
energy cycles off) give time for the
food to transfer heat to the inside of
the food. An example of this is with the
defrost cycle (Power Level 3). If the
microwave energy did not cycle off, the
outside of the food would cook before
the inside was defrosted.
1. Press the Power Level button.
2. Turn the dial to select the power level.
3. Press the Start/+30 sec/Select
button to enter.
OPERATION INSTRUCTIONS
PAGE 13 • SET UP & USE
ENGLISH