Haier HPR09XC5 Product Manual - Page 7

Assembly and Installation Accessories Include 1 2 3 1. Plastic panel - 2 pieces 2. Window Panel Adaptor - 1 piece 3. Screws - 4 pieces 4. Heat Exhaust hose connector-2 pieces 5. Heat Exhaust hose-1 piece 1. Adjust the Plastic Panel to the width or height of your window and tighten A the 2 screws that are attached to the panel. 2. Push the round Window Panel Adapter through the rear of the Plastic Panel. Line up the holes and tighten the Adapter with 4 screws that are included in the kit. (Tighten screws from the front). 3. Install the Window Plastic Panel into the window. If necessary use duct tape B to better secure the panel. 4. Connect exhaust hose to the unit by inserting the hose connector that is attached to the hose into the exhaust. (See Illustration A) 5. Move the unit to the window, extend the hose and attach the other end of the hose to the window. Align the tabs on the hose and window panel adapters and fasten them together. Hose Connector Exhuast Hose Hose Connector English 6