Haier HPRD12XH5 User Manual - Page 11

English Control Panel Power Control The power control turns the unit on and off. Warning Light Do not operate the unit if this light is lit. Please call the service number and bring the unit into your nearest service center. Dehumidifier Mode • Air is dehumidified as it passes through the air conditioner, without being in full cooling mode. (Note: The warm air exhaust hose must vent inside the room, not outside as it does when cooling. If the unit is vented outside some cooling will occur.) Mode Control The mode control has 3 settings: • Cool • Dehumidifier • Heating (only HPRD12XH5)/Fan The settings are adjusted with Mode Control button. A green light will indicate which setting is currently being used. Cooling Mode • During the cooling mode the air is cooled and hot air is exhausted to the outside air through the exhaust tube. • Adjust fan speed and temperature to suit your desired comfort level. Heating Mode (Led in Red) (only HPRD12XH5) • In heating mode, the air flow is selectable. (Note: Heating is activated only when the ambient temperature is below 77˚ F.) Fan Mode (Led in Yellow) • Air is circulated throughout the room with no cooling. (Note: Unit does not need to be vented in Fan mode.) Fan Speed The Fan Speed Control has three settings: High, Medium or Low. In the Dehumidifier or Dry Mode, the fan will only operate at low speed. (10)