Haier HSA04WNCBPG User Manual - Page 7
Door Alignment
View all Haier HSA04WNCBPG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English EEnngglliisshh Door Alignment 1. Remove the top hinge cover using a flat head screw driver. Gently lift from the rear of the hinge and slide forward. 2. Loosen the top hinge screws using a phillips head screwdriver. 3. Adjust the door or put a spacer in between and then tighten the screws. 4. Replace the top hinge cover by aligning the rear of the cover with the rear of the hinge. Press firmly on the front of the cover until it snaps in place. fig.1 6 6
Door Alignment
1. Remove the top hinge cover using a flat head screw driver. Gently lift from
the rear of the hinge and slide forward.
2. Loosen the top hinge screws using a phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the screws.
4. Replace the top hinge cover by aligning the rear of the cover with the rear
of the hinge. Press firmly on the front of the cover until it snaps in place.
6
fig.1
English
English
6