Haier HSU-12LEA13-H Operation Manual - Page 3

Operation Unit start / stop Press ON/OFF button, unit starts or stops. HEALTH ON/OFF FAN Select temp.setting FAN MODE SWING Operation Mode Display Board AUTO Remote Controller Note Under the mode of auto operation, air conditioner will automatically select Cool or Heat operation according to room temperature. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. COOL DRY In DRY mode, when room temperature becomes lower than temp.setting+2oC,unit will run intermittently at LOW speed regardless of FAN setting. HEAT FAN nothing In FAN operation mode, the unit will not operate in COOL or HEAT mode but only in FAN mode ,AUTO is not available in FAN mode.And temp.setting is disabled. In FAN mode,SLEEP operation is not available. Cool Operation Auto Operation According to the automatic choice system in temperature in indoors cold or make the hot movement FAN MODE SWING Dry Operation FAN MODE SWING Note: In DRY mode, when room temperature becomes lower than temp. setting+2oC, unit will run intermittently at LOW speed regardless of FAN setting. Fan Operation FAN MODE SWING Heat Operation FAN MODE SWING Note: In HEAT mode,warm air will blow out after a short periodof the time due to cold-draft prevention function. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. Cooling only unit do not have displays and functions related with heating 1.When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according AUTO LO MED HI HEALTH ON/OFF to room temperature. 2.In FAN operation mode FAN the unit will not operate in COOL mode but only MODE in FAN mode ,AUTO is not available in FAN mode.And temp.setting is disabled. Air Flow Direction Adjustm (1) FAN MODE SWING Remote controller can memorize each operation status. When starting it next time,just press ON/OFF button and unit will run in previous status. 2