Haier HSU-18LEA13 User Manual - Page 9

Operation Auto,CoolˈDry,Heat and Fan operation (1) Unit start Press ON/OFF button, unit starts. (2) Select operation mode Press MODE button. For each press, operation mode changes as follows: Operation mode AUTO COOL DRY HEAT FAN Remote controller Display board Unit will run in selected mode. (3) Select temp. setting Press TEMP button. Every time the button is pressed, temp. setting increases 1oC Every time the button is pressed, temp. setting decreases 1oC Unit will start running to reach the temp. setting on LCD. (4) FAN Press FAN button. For each press, fan speed changes as follows: HEALTH ON/OFF  FAN  MODE   SWING TIMER CLOCK SET SLEEP LOCK RESET AUTO LO MED HI Unit will run at selected fan speed. Note:AUTO is not available in FAN mode. (5) Unit stop Press ON/OFF button. Note: 1. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. 2.In DRY mode, when room temperature becomes lower than temp.setting+2oC, unit will run intermittently at LOW speed regardless of FAN setting. 3.In FAN operation mode, the unit will not operate in COOL mode but only in FAN mode , AUTO is not available in FAN mode.And temp.setting is disabled. In FAN mode,SLEEP operation is not available. 4.In HE AT mode, warm air will blow out after a short period of the time due to cold-draft prevention function.When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. 5.Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status. 6.Cooling only unit do not have displays and functions related with heating 8