Haier HTR13 User Manual - Page 11

Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see the Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the RF IN jack. RF IN jack RF IN jack 75 ohm coaxial cable 300-75 ohm matching transformer If using a flat UHF 300 ohm twin-lead wire, connect these flat wires to an optional 75/300 ohm matching transformer/adapter (available at many retailers), and then connect the adapter to the 'RF' IN connector on the back of the television. Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires) RF IN jack 300-75 ohm matching transformer Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach thetransformer to the combiner, then attach the combiner to the RF IN jack. Combiner UHF 300 ohm VHF 300 ohm Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires) RF IN jack Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner. Attach the combiner to the RF IN jack. Combiner VHF 75 ohm UHF 300 ohm 10