Haier HW-12CV03 User Manual - Page 13

Installation instruction The installation of air conditioner(only for reference) 1,Make the wall hole or window hole(see Fig.1) A B HW-09CV03 350 530 HW-12CV03 Iron bracket 2,Fix the prefabricated iron bracket to stable positin by expansible screws. 3,Take out the conditioner and accessories from the package. 4,Lift the back of the machine body silghtly . You can see the drain hole at the back of the bottom plate.Plug the black rubber lid of the enclosed accessories into the hole(see Fig.2). 5,Plug the drain elbow of the enclosed accessories(with seal ring)into the drain hole on the vertical wall at the back of the bottom plate (see Fig.3). Depth of the wall Fig.1 Condenser Rubber lid Fig.2 6,If you need to lead the condensed water to indicated position,pleae purchase a piece of plastic pipe with inner diameter of 16,set it on the drain elbow and tie it tightly. 7,After installation of all the accessories,put the whole machine on the iron bracket .If there is drain hose ,lead the hose to needed position (see Fig.4). Drain hose Fig.3 Drain elbow 11