Haier HWM50-18B User Manual - Page 15

Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use the "Twice wash" program for the woolen laundries. Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the process programs Times of pushing "PROCESS " button Selected procedure program Applicable procedure Contents(the lighted indicators indicate the programs about to run) 0 Wash, rinse, spin When the common laundries need washing, rinsing and Soak Wash Rinse Spin spinning. 1 Wash(the washing liquid remains in Repeat using the washing the tub) liquid Soak Wash Rinse Spin 2 Wash, rinse(the rinsing liquid remains in the tub) Repeat using the washing liquid Soak Wash Rinse Spin 3 Rinse, spin When the laundries need rinsing and spinning after Soak Wash Rinse Spin manual washing 4 Spin(spin after drain) When the laundries need only spinning after manual Soak washing (first drain then spin) Wash Rinse Spin 5 Soak, wash, rinse, spin If the laundries are very dirty, Soak or the sleeve and collar are dirty, first soak then wash Wash Rinse Spin If you push the "PROCESS" button for 6 times, it will resume the original mode, and it will circulate like that. The soak program can be used as fitting of the STANDARD & JEANS automatic programs. Soak with slight stirring before wash. 4 Push the " WATER LEVEL " button to select suitable water level When the power is switched on, the washing machine will check the cloth automatically. After that, the water level is set automatically. To select other water level, push the button. 13