Haier HWM55-13S User Manual - Page 10

Washing sequence Water-filling selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer). Wash selector (Standard current, strong current) Water-filling entrance Buzzer (The buzzer will ring when the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF SILK WOOL COTTON LINEN WASH TIMER STRONG STANDARD DRAIN WASH SELECTOR BUZZER OFF MAX OFF SPIN TIMER Wash 1.Water inlet selector (1) Set the water inlet selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. 3.Put in the laundries. If the water quantity is insufficient, please add water. 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) WASH SPIN Figure 1 STRONG STANDARD Figure 2 DRAIN WASH SELECTOR Figure 3 OFF SILK WOOL 5.Select the washing time Select the washing time according to the laundries. (Figure 4) 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). Figure 4 COTTON WASH TIMER LINEN STRONG STANDARD DRAIN WASH SELECTOR Figure 5 8