Haier HWM75-276S User Manual - Page 10
Washing sequence
View all Haier HWM75-276S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Washing sequence Wash selector Water-filling selector handle (standard current, gentle current) Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Water-filling entrance Overfilling sign Buzzer Spin timer (The buzzer will ring when the washing finishes) (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF 15 3 GENTLE STANDARD DRAIN 12 9 WASH TIMER 6 WASH SELECTOR OFF MAX BUZZER OFF 5 1 4 2 3 SPIN TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. WASH SPIN Figure 1 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. GENTLE Figure 2 STANDARD DRAIN 3.Put in the laundries. If the water quantity is insufficient, please add water. WASH SELECTOR 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) Figure 3 OFF 3 5.Select the washing time 12 6 Select the washing time according to the laundries. (Figure 4) 9 WASH TIMER Figure 4 STANDARD GENTLE 6.After washing, the buzzer will ring. Set the "WASH DRAIN SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR Figure 5 8