Haier HWM75-27S User Manual - Page 10

Washing sequence Water-filling selector handle Wash selector (standard current, gentle current) Water-filling entrance Overfilling sign Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Buzzer (The buzzer will ring when the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF WASH TIMER STANDARD GENTLE DRAIN WASH SELECTOR OFF MAX BUZZER OFF SPIN TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. WASH SPIN Figure 1 Figure 2 STANDARD 3.Put in the laundries. If the water quantity is insufficient, please add water. GENTLE WASH SELECTOR 4.Select the current. Select the strength of the current according to OFF the laundries. (Figure 3) DRAIN Figure 3 5.Select the washing time Select the washing time according to the WASH TIMER laundries. (Figure 4) STRONG 6.After washing, the buzzer will ring. Set the "WASH GENTLE SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR Figure 4 DRAIN Figure 5 8