Haier HWM75-7288 User Manual - Page 13

Disposal after washing

Page 13 highlights

Disposal after washing z Please ¿rst pull off the power plug from the receptacle before cleaning. z After using, please clean the lint and foreign materials of the lint ¿lter and overÀow ¿lter in time. Otherwise it may inÀuence your using the machine. Clean the detergent box and set it on the control panel seat. 1 The method of dismantle: Push it up aslant and gently. 2 The method of install : install it upwards and aslant and push it in. Cleaning the lint ¿lter 1 Push down the spring piece of the top lint ¿lter to make the claws out of the ¿lter cover, and then pull out the lint ¿lter to get it down. 3 Put the lint ¿lter into ¿lter cover, and make it tight . 2 Pull the back of the lint ¿lter, and then you can get down it off the front cover of the lint ¿lter. Sweep the rubbish in the lint ¿lter. Put the back of the lint ¿lter into the front cover . 4 Make sure the lint ¿lter well installed, or it can inÀuence your use. Notes: z The ¿lter screen of the water inlet valve is likely to be blocked by foreign materials and inÀuence the water inlet. Please clean it with brush every two months. z If the cabinet is dirty, wipe it with wet cloth z Do not Àush it directly with water. z Wipe it with neutral detergent. z Do not wipe it with thinner, petrol, alcohol etc. z After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). Petrol Thinner Alcoho z Do not store water in the washing machine for a long period. Drain the water completely after each using. z Be sure to pull off the power plug before maintenance. z Hang up the power cord. z Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time ( about 1 hour), then close the top lid. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

13
Disposal after washing
Please
rst pull off the power plug from the receptacle before cleaning.
After using, please clean the lint and foreign materials of the lint
lter and
over
ow
lter in time. Otherwise it may in
uence your using the machine.
1
1
2
2
3
4
The method of
dismantle: Push it up
aslant and gently.
The method of install :
install it upwards and
aslant and push it in.
Clean the detergent box and set it on the control panel seat.
Cleaning the lint
lter
Push down the spring
piece of the top lint
lter
to make the claws out of
the
lter cover, and then
pull out the lint
lter to
get it down.
Put the lint
lter into
lter
cover, and make it tight .
Make sure the lint
lter
well installed, or it can
in
uence your use.
Pull the back of the lint
lter, and then you can
get down it off the front
cover of the lint
lter.
Sweep the rubbish in the
lint
lter.
Put the back of the lint
lter into the front cover .
Notes:
The
lter screen of the water inlet valve is likely to be blocked by foreign materials and
in uence the water inlet. Please clean it with brush every two
months.
If the cabinet is dirty, wipe it with wet cloth
Do not
ush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
After washing, close the water faucet.
( If needed, you can dismantle the water inlet hose).
Do not store water in the washing machine for a long period.
Drain the water completely after each using.
Be sure to pull off the power plug before maintenance.
Hang up the power cord.
Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time ( about 1 hour), then close the top lid.
Thinner
Petrol
Alcoho