Haier HWM75TL User Manual - Page 11

Problems with clothes: * Clothes become excessively creased: this is due to improper sorting, overloading or washing in excessively hot water repeatedly. Avoid overloading and resort your load.Wash in cooler water. * Soap residue: detergent may not be dissolved in water. * Check water temperature, add detergent as wash tub is being filled with water. Reduce detergent dosage or pre-dissolve detergent before adding to wash. * Spots or stains on your clothes: this is due to incorrect use of fabric softener. Refer to manufacturers instructions on the container and follow directions. * Clothes are grayed or yellowed: this may be due to not using sufficient detergent for large loads.Add more detergent to the load. * Clothes are ripped & have holes/excessive wear & tear: this may be due to sharp objects left in washing. Remove all small loose sharp objects, fasten belts, zippers, metal snaps etc. Check if you are using undiluted bleach. Never add undiluted bleach to wash. LED Display Notes: Trouble Codes Reasons Rinse and spin indicators flash Unit does not drain, or the speed of draining is too slow. All process indicators flash The washer is out of balance. Please open the lid and rebalance the load. All load size (water level ) indicators The water inlet time exceeds the preset time. flash "Small" and "Extra Small" load size (water level) indicators flash Water overflow protection. "Super" and "Large"
load size (water level) indicators flash The water level sensor fault - Call service. Beeps Top lid not close properly. INSTALLATION INSTRUCTIONS Tools and Materials Required You will need to have following tools to help you with the installation of your washer: Pliers, Wrench, Tape Measure, Gloves, Level 10