Haier HWM80-0626S User Manual - Page 4
Safety precautions
View all Haier HWM80-0626S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Safety precautions Please insert the power cord into special When the machine is normally using, receptacle with rated voltage. Be sure to please put the power plug at the use single-phase three pins receptacle. location easily to be inserted and The earthing terminal of the receptacle extracted by hand. Be sure to pull the must be earthed reliably. If possible, plug off when there's power failure, or please adopt electric leakage protector. the machine is being moved, cleaned or when it is idle. Do not bend ,extend, twist, bind by force. Do not press or nip it with weight. Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully. If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel. Do not use water hotter than 50 C . In case the washing machine is installed on ground with carpet , do not block the ventilation hole with carpet. Ventilation hole at the bottom of the washing machine Do not wash water-proof laundries like the raincoat, bike covers etc, to avoid abnormal vibrations in spinning. Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more. 2