Haier HWM80-113S User Manual - Page 11
Washing sequence
View all Haier HWM80-113S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ÏWa´shiµngÓseËque³ncÐe ò Water-filling selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Wash selector Water-filling entrance Buzzer (Strong current, (The buzzer will ring when standard current) the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF WASH TIMER STRONG STANDARD DRAIN WASH SELECTOR OFF MAX BUZZER OFF SPIN TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. WASH SPIN Figure 1 STRONG Figure 2 3.Put in the laundries. If the water quantity is insufficient, please add water. STANDARD WASH SELECTOR 4.Select the current. Select the strength of the current according to OFF the laundries. (Figure 3) DRAIN Figure 3 5.Select the washing time Select the washing time according to the laundries. (Figure 4) WASH TIMER STRONG STANDARD 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR Figure 4 DRAIN Figure 5 9