Haier HWM80-113S User Manual - Page 6
How to change the direction of the drain hoses
View all Haier HWM80-113S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Before Using How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain Figure 1 hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2) Side sectional view Drain hose Fixing hook fixing hook installation hole Pull outwards slightly Drain hose Take off the drain hose Drain hose fixing hook Figure 2 Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3). Install the two drain hose fixing hooks taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).Then rotate for 90 (As per Figure 4). Rotate the fixing hook for 90 Take off the fixing hook downwards Figure 3 Rotate the fixing hook for 90 to fix it Insert the fixing hook into the installation hole upwards Figure 4 Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side. Figure 5 Figure 6 Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5). Extend the drain hose from the rear side Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).