Haier HWM80-150S User Manual - Page 11

Washing sequence Using process Water-filling selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Wash selector (Strong current, standard current) Water-filling entrance Buzzer (The buzzer will ring when the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF WASH TIMER STRONG STANDARD DRAIN WASH SELECTOR OFF MAX BUZZER OFF SPIN TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. WASH SPIN Figure 1 Figure 2 3.Put in the laundries. If the water quantity is insufficient, please add water. 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) WASH SELECTOR STRONG STANDARD DRAIN Figure 3 WASH TIMER OFF 5.Select the washing time Select the washing time according to the laundries. (Figure 4) 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR STRONG STANDARD Figure 4 DRAIN Figure 5