Haier HWM80-35 User Manual - Page 6

Before Using Adjust the installation position The largest permitted slope of the bearing surface of the washing machine is 2. Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods: Hang a becket with weight to confirm if the washing machine is horizontal. Install the water inlet hose ; Select the water level Insert the water inlet hose into the water-inlet on the control panel directly. ( pull it out to dismantle it) Water level indicator High MAX Fill the water to the water level selected about 83L according to the quantity of the laundries. Medium about 68L MED Low Attention: MIN about 49L Do not exceed the " High " water level , otherwise the water may overflow out of the machine. Water inlet hose Water inlet MAX MED MIN Use the quick water inlet Insert the water-filling jointer into water inlet hose, then push the water-filling jointer into the water inlet on the control panel. (To dismantle the water inlet hose, just push the control handle as indicated in the figure and pull it out) Water-filling jointer Fill water into the wash tub directly through quick water inlet. It can reduce the humidity inside the control panel significantly and prolong the operating life of the components. Water inlet hose Push Control handle Quick water inlet