Haier HWM80-828A User Manual - Page 8
Use the, operation button
View all Haier HWM80-828A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
How to change the direction of the drain hose 1.Lean the machine down gently with the front surface facing the ground. as indicated in Figure 1 2.Dismantle the rear cover of the washing machine. as indicated in Figure 2 3.Pinch the mouth of drain pipe and take off the pipe hook. 4.Put your hand into the machine and loosen the clip of drain pipe support then pull inside the pipe and fetch out from the other side and set it on the clip, as indicated in Figure 3. 5.Install Hook of fixing the drain hose and bottom cover then lift the machine up gently. Unhinge clamp outlet Figure 1 Figure 2 Figure 3 Remarks: in order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman . 6 5 Use the operation button Description of operation button FIRST RINSE SECOND RINSE THIRD RINSE RESERVE WATER AIR DRY 40 30 20 10 SOAK 20 15 10 5 WASH REMAIN(MINUTES) RESERVER(HOURS) 3 2 1 OVERFLOW 97 8 756 534 31 2 DELAY RINSE SPIN WATER LEVEL COMMON BLANKET CHILD SPEEDY STANDARD MEMORY WOOL SILK START PAUSE POWER ON/OFF Indicator mode and meaning Off Flashing, indicating the running program On, indicating the program about to run or the selection mode Child lock function The function is intended for children safety and preventing the washing program from accidental changes by children. Push and hold the water level button and spin button, then push down the power on/off button . You cancontinue setting desiredwashing procedures.After setting ,pushdown the start/pausebutton. The child lock function is activated. all of the buttons are locked and cannot make selection . Release the child lock function :push down water level button and spin button at the same time for more 2seconds . After a beep sound ,the child lock function is released. A "POWER" button POWER ON/OFF Push the "POWER" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will switch off the power automatically after 5 minutes. B "START/PAUSE" button START After the power is switched on, press it to start the machine PAUSE During working, push it to pause. During pause, push this button to restart and go on working C "PROGRAM" button Program Application Program Application PROGRAM COMMON Washing the common laundries BLANKET Washing the relatively big and thick laundries STANDARD Standard saving washing for normal laundries MEMORY The commom wash , the washing machine will set to MEMORY program including "wash, rinse,spin,water value "automatically last time JEAN Washing the relatively big and thick laundries SPEEDY Quick washing for normal laundries WOOL SILK Washing for the woollen laundries, under 2.5kg Washing the silk laundries 11