Haier HWM85-7288 User Manual - Page 11
Use the operation buttons
View all Haier HWM85-7288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Use the operation buttons Off On: indicate the program about to run,or indicate the selected mode or indicate the water level Flashing: indicate the running program It displays "--" during detecting. It displays total remained time during the running program (min). It displays remained reserved time during reserve program hour It displays abnormal symbol in abnormal situation.(See to Page 14) The digitron displays the time remained (in minute) before the washing is ¿nished. Push down the reserve button. The reserve indicator light is on the digitron displays the reserve time of ¿nishing washing (in hour). When the machine is started, the reserve indicator light is on, indicating that the reserve function is running. Push the On/Off button to switch on the power. When the power is on, push it again to switch off the power. Push the On/Off button to switch on the power. If the start/pause button is not pushed, the washing machine will automatically switch off the power after 5 minutes. After the power is switched on,press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working 66L 72L 54L 60L 38L 46L 20L 29L The washing machine can detect the laundries automatically during After detection, it will set the water level to suitable value among 46L 60L 72L automatically during the STANDARD program. The water level decided may be different from actual value because of the different moisture level of the laundries. You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting. If there's water inside the tub, the machine cannot detect the laundries and will display water level 60L.If wet laundries are put in, it may display water level 72L. You must set suitable water level by yourself. If quick program is selected, it will display water level 38L. If tub dry program is selected, the water level will not respond. During operation of wash and rinse program, you can push down the waterlevel button to add water. When you release the button, or it reaches the overÀow water level, the machine will stop adding water. Rinse water level is more first level than washing (except the highest water level and hand choosing rinse water level). Program Applicable situation SOAK Washing the relatively big thick or very dirty laundries STANDARD Common washing If "STANDARD" program is set, the machine will execute fuzzy detection. The computer will set the water level and wash time as per the cloth and quantity of the laundries. The whole procedure is under automatic control. SOFT Washing the woollen textiles QUICK Posthaste wash of the laundry under 2.0 kg with light soil. The water level will automatically set 38L . WASH RINSE SPIN Just run the washing cycle without drainage cycle. The detergent was left inside the drum and can be recycled. Remove the left detergent from the clothes and then rinse the clothes When the clothes are washed or the clothes are quite wet, extra spin is needed. TUB DRY The purpose is drying the inner tub and the outer tub, which can avoid growing 11