Haier HWM90-728 User Manual - Page 7

How to change the direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Take of the drain hose frame. Put down the drain hose , put the drain hose into the cabinet. take off the drain hose bushing (As indicated in Figure 1). Drain outlet protecting cover 3.Dismantle the protecting cover of the drain outlet at the other side Install the bushing as per indicated in Figure 2. 4.Extend the drain hose from the other side. Fix the drain hose onto the base frame with the drain hose frame. (As indicated in Figure 3) Drain hose frame Drain outlet protecting cover Drain hose Drain hose bushing Drain hose frame Figure 1 Drain hose bushing Figure 2 Figure 3 Figure 4 5.Install the protecting cover of the drain outlet at the other side as per indicated in Figure 4. Remark: In order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman . Usage of the drain hose 1 - The drain hoseshall drain smoothly 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2.Do not trample or press the drain hose. 4.1f extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m. 30mm 4r.