Haier HWMP95TL User Manual - Page 10

*Water temperature is incorrect: Check your water heater temperature.Hot water needs to be at a temperature of at least I 20°FI 40°F(49°C-60°C).Check to make sure the inlet hoses are properly connected (E.g. Hot to hot & cold to cold). *Water leaks:This may be due to incorrectly installed drain hose or fill hoses.Your home drain may be clogged .You may need to tighten hoses, check the plumbing or call a plumber for assistance. *Water will not drain:This may be due to not installing your drain hose correctly. Check the position of the drain hose. In order to drain properly, make sure that top of drain outlet is less than 5 ft. (I .5 m) above the floor. Washer is making noise: *Washer may need to be reinstalled (Check washer installation section). *Washer load may need to be re-balanced, as the load may be uneven. * Coins, loose change, buttons or other heavy objects could create noise related sounds. * Squealing sound: Due to overloaded wash tub. *Vibration Noise: may be caused by not leveling washer properly on the floor or uneven distribution of clothes in the tub. Normal Operating Sounds * The following sounds are normally heard during the operation of the washer: * Tumbling sounds:This is normal as the heavy wet clothes in the washer are continuously being lossed around. * Air rushing noise:This happens when the washer tub spins at very high speeds. * Wash and Rinse cycles going on and off will also make clicking sounds. 9