Haier HWR06XC3-T User Manual - Page 19
Locating Unit In, Window, Attach Basepan, Angle
View all Haier HWR06XC3-T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English 2 INNER SILL 1. This unit is designed for installation in standard double hung windows with actual opening widths of 22 to 36 . The upper and lower sash must open sufficiently to allow a clear vertical opening of 14 from the bottom of the sash to the window stool. 2. If storm window presents interference, fasten a 2 wide wood strip(not included) (OUTER SILL) to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference by the storm window frame (STORM WINDOW FRAME) or wood strip (OUTDOORS) to help condensation to drain properly to the outside. 3. Install a second wood strip (approximately 6 long by 3/2 wide and same thickness as first strip) in the center of the outer sill flush against the back off the inner sill. This will raise basepan angle . 4. If the distance between STORM WINDOW FRAME and WOOD STRIP MOUNTED ON TOP OF INNER SILL is more than 1 , two of wood strip are not necessary. I O N U D T O D O O R O S OUTER R SILL S WOOD STRIP MOUNTED ON TOP OF INNER SILL 1 MAX. 3/4 CLEARANCE INNER SILL I WOOD STRIP FOR BASEPAN N ANGLE D O O R S STORM WINDOW FRAME O U T OUTER D SILL O O R S LOCATING UNIT IN WINDOW Open the window and mark center line on the center of the inner sill. INNER SILL CENTER LINE INDOOR SIDE ATTACH BASEPAN ANGLE Install the basepan angle behind the inner window sill, with the short side of basepan angle as shown. Use the 2 short screws13/32" provided. The basepan angle helps to hold unit securely in place. Be sure to place basepan angle edge flush against back of inner sill. INNER SILL SHORT SCREW13/32" OUTER SILL CENTER LINE INSIDE SHORT SIDE 8 8 OUTSIDE BASEPAN ANGLE 17