Haier JC-110GD Installation Instructions - Page 14

Problem solving checklist Problem solving checklist If there is a problem with your appliance, please check the following points before contacting your local Haier Appliances Dealer or Authorised Service Agent or Customer Care Centre. Problem Wine Cellar does not operate Wine appears too warm Wine temperature is too cold Motor operates for long periods Moisture build up on interior or exterior surface of the Wine Cellar Wine Cellar door does not shut properly Possible causes What to do No electricity at the power outlet Check that the Wine Cellar is correctly connected and power switched on Check another appliance at the same outlet Check house fuse Temperature setting not correct Adjust temperature control to colder setting Frequent door openings Minimise door openings to allow temperature to stabilise Large amount of wine Allow time for recently added wine to bottles added reach desired temperature Temperature setting not correct If temperature control setting is too cold, adjust to a warmer setting Hot weather Minimise door openings to allow temperature to stabilise Frequent door openings Doors may have been opened frequently or for an extended period of time Temperature setting too low The running time of the motor is a ected by the temperature setting chosen. Refer to the Temperature Control or Wine Storage sections for optimal temperature settings. Door not sealed properly Check that the gasket is sitting at and sealing tightly Not unusual during periods of high humidity Wipe dry, or activate the condensation control function Prolonged or frequent door openings Minimise door openings to allow the temperature to stabilise. Also check that the gasket is sitting at and sealing the door tightly. Cabinet not positioned Level the Wine Cellar stable or level Door obstruction Check for obstructions e.g. wine bottles, shelves 12