Haier JW-S20B User Manual - Page 8

Preparation before washing

Page 8 highlights

Ï P´repÇarat°ion×bef¼ore±wa¸shing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Hang the drain hose up. Pay attention to followings before washing the laundries Check if Clear the Tie the long The quantity of the laundries pocket. Take strips; fasten the laundries has special out the coins, the buttons; shall not be too requirement sand, hairpins close zippers. large. Stretch on washing etc. and loosen the laundries before putting them in the tub. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries. a. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand. d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil. e. For those laundries that may get lint ball and those with long fur, turn it over before putting in. f. Do not put those laundries polluted by chemicals into the washing machine directly. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Ï´Ç°×¼±¸
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that
the washing machine is earthed
reliably .
Then
insert
the power plug into the
receptacle. Do not connect the earth
terminal
to
the gas pipe and
tap water pipe.
3.Hang
the drain hose up.
Pay attention to followings before washing the laundries
Check
if
the laundries
has special
requirement
on washing
Clear the
pocket. Take
out the coins,
sand, hairpins
etc.
Tie the long
strips; fasten
the buttons;
close zippers.
When the pulsator
is
running ,
the
buttons
of
the
laundries may
cause noise. For
the sake of
discretion, please
put the laundries
with buttons
into
other laundries.
The quantity of
the
laundries
shall not be too
large.
Stretch
and
loosen the
laundries before
putting
them in
the tub.
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like
mud or dust. For the parts with heavy soil, please apply detergent on
them in advance, which
can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn
it over before putting in.
f.
Do not put those laundries polluted by chemicals into the washing
machine directly.
Preparation before washing
6