Haier L22C1120a User Manual - Page 10

Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Min 1 m 4. Power: Insert the power cord in the wall socket Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. with AC power supply.There is an LED indicataor on the front panel. If the LED color is Blue, it means the TV set is on. If the LED color is Red, it means the TV set To prevent any unsafe situations, no naked is in standby mode. flame sources, such as lighted candles, should be placed on or in the vicinity. 5. Turn the TV on: Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing. Press the Power key on the remote control or the side panel control buttons.The TV will turn on within a few seconds. 2. Connect the antenna cable or CATV cable to the aerial socket ANT IN 75: at the back of the TV set. Power Key Power Video Comp PC/HDMI TV 3. Remote control: Remove the cover of the battery compartment. Insert the included 2 batteries (Type AAA 1.5V). 10