Haier L24K3 User Manual - Page 15

Basic Receiving and Playing Operations V Search   Press / to select the Search option, and finally press /to start manual search. Upon finding a program, the search will automatically stop, and the program will be stored onto the current channel. You may stop the search by pressing OK or MENU. V Fine Tune   Press / to select the Fine Tune option, and then press / to start UP or DOWN fine tuning until obtaining a relatively good picture effect. The fine tuning function is for the purpose of improving picture effect through fine tuning when that of a certain program is not good enough. Normally, the optimal picture effect can be obtained without fine tuning when watching TV programs, and fine tuning is to meet the need of adjusting a certain program. V Color system   Press / to select the Color Systems option, and then press / to select correct color system. The TV is designed with three systems for your choice, i.e. Auto, PAL , SECAM and NTSC. Generally, the system is set as Auto and it is not necessary to make an adjustment. The system is normally set as Auto during auto search. V Sound system The TV is designed with four systems for your choice, i.e. D/K, M, B/G and I. Generally, it is not necessary to adjust the system. The system is normally set as DK during auto search. V Skip When the skip is set ON, the channel will be skipped when pressing CH˜ or CH ™ and only can be selected by pressing 0-9 numerical keys. If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again. 3. Press/to set Skip as Off. Automatic search A Press MENU on the remote control to display main menu, and then press / to select Tuning menu. (Note: Only when Tuning Lock in the H. Lock menu is Off can the Channel menu be selected.) menu Channel Edit Auto Search Prog. Exchange Sound Tuning   B press / to select the Auto Search option, press OK to enter the auto search menu, afterwards press / to select the Confirm option, and finally press OK to confirm the starting of auto search. menu Sound Tuning C During auto search, the scale value on the progress bar is continually increasing, indicating the auto search is in progress. After finishing the auto search, the TV will play the channel starting the auto search. To stop the search in halfway, just press MENU/OK, and the TV will play the first searched channel. menu Auto Search Auto Searching Found Channel(s):2 Frequency:25NHz 40% Cancel Sound Tuning Exchange A Press MENU on the remote control unit or MENU on the TV's front panel to display main menu, and then press/to select Tuning menu.   B Press / to select the Prog. Exchange option, and then press OK to enter its submenu.   C Press / to select the To Channel option, and 15 TFT -LCD television Owner's Manual