Haier L24T6 User Manual - Page 15

Troubleshooting Carry out simple inspections for trouble-shooting. These tips may save you time and money. Expenses incurred for installation of receiver and customer control adjustments are not covered by warranty. Symptoms Items to be inspected and measures to be taken Ghost phenomena Power failure * This may be caused by things blocking the antenna such as high buildings and/or hills. Use an adjustable high antenna, which may improve image quality. * Check whether the power cord of the TV set is plugged into the outlet. * Unplug the TV set, wait for 60 seconds and plug the TV set in main outlet again and turn on the TV set once again. No image * Check the antenna connection at the back of the TV set to see whether it is connected to the TV set correctly. * There may be some problem with the broadcasting station. Try other channels. * Adjust contrast and brightness settings. Normal image but no sound * Turn up the volume * Check whether the TV is set as mute, press the corresponding button on the Remote control. Normal sound but poor color * Adjust contrast, color and brightness settings. Poor image quality * When an S-VHS camera or camera connection is enabled or it is connected to other peripheral units, the image quality will be poorer. Turn off other peripheral units for the moment. Snowflakes and noise * Check the antenna connection Horizontal dotted line Remote control fails * This may be caused by electronic interference such as a hair dryer or nearby fluorescent tube. * Turn off the device. * Check whether the batteries are normal. Replace them when necessary. * Clean the lens of Remote control receiver on the TV set. * You may still use the front button on the TV set. 13