Haier L47A18-AK User Manual - Page 13

External Equipment Connections DVD Setup How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output, use S-Video. How to use 1. Turn on the DVD player, insert a DVD. 2. Use the S-Video button on the remote control to select S-VIDEO or YPbPr/YCbCr mode. 3. Press Play button on external equipment for program play. 4. Refer to the DVD player's manual for operating instructions. AV OUT Y PbPr CbCr IN L AUDIO R VIDEO L AUDIO R AV1 IN S-VIDEO IN or DVD HDMI or DVI Setup -To watch digitally broadcast programs, purchase and connect a digital set-top box. How to connect Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, VGA or HDMI port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections. IN1 IN2 HDMI/DVI VIDEO VGA IN How to use 1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.) 2. Use TV/AV on the remote control to select VGA or HDMI (Y, Pb/Cb, Pr/Cr) mode. 3. Press Play button on external equipment for program play. 10 Y PbCb CbCr or AV OUT L AUDIO R VIDEO L AUDIO R AV IN