Haier LE32N1620 LE32N1620 Manual - Page 17
econdary Audio Program
View all Haier LE32N1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Mute 1 Press the MUTE button on the remote control and an icon indicating the MUTE function is active will display on the screen. At this time, the sound of the TV set is turned off. 2 To restore sound, press the MUTE button again or press the VOL+ button. SAP Broadcasts Setup This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program if a station transmits an additional sound signal. When the MTS button on the remote control is pressed, the TV will only receive the signal if the TV station transmits the proper signals. Mono sound is automatically received if the broadcast is only in Mono, even if Stereo or SAP has been selected. Select Mono if you want to listen to mono sound during stereo/SAP broadcasting. Stereo or SAP can be received in an analog channel. 1 Use the MTS button to select your desired MTS mode in an analog signal. Each time you press the MTS button, Mono, Stereo or SAP appear. If other languages are available in the digital signal, select them with the MTS button. 2 Press the EXIT button to save and return to TV viewing. Operation Channel menu 1 This TV set has two methods to set the channels: Channel Scan and Channel Skip. 2 In this section, using the remote control to set the channels is explained. You can also use the buttons on the TV to set the channels. Note The Channel Menu is only accessible when the input source is set to TV. Channel Scan 1 Press the MENU button and then use the / button to select the TV menu. 2 Press the/ ENTER button to select Antenna. 3 Press the/button to select Air or Cable mode. 4 Press the / button to select Channel Scan. 5 Press the/ ENTER button to start searching. 6 To cancel searching, press the EXIT button. Note When Air is selected, the TV will detect antenna signals and will search for NTSC (analog) and ATSC (digital) TV channels available in your local area. When Cable is selected, the TV will detect signals supplied by your cable company. It will search for NTSC and QAM modulated channels available in your area. Haier LED HDTV EN-16