Haier LE32N1620W LE32N1620 Manual - Page 16
Getti, tarted
View all Haier LE32N1620W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Operation Operation guided through an initial setup process. Please follow the instructions provided on the screen to complete this process. There are several options in the system menu that you may need to adjust in order for your TV to work properly. Please read the instructions that follow carefully. Note The drawings of the screen menus found in this on your TV. These drawings are for illustrative purposes only and are intended to guide your TV operation. Getting Started 1 Connect the power cord to a wall outlet and then press Power to turn the TV on. The Power Indicator turns on. 2 Select the input source that you want to view by pressing the INPUT button on the remote control. 3 When you are finished using the TV, press the POWER button on the remote control. The TV will return to standby mode. 4 If you will not use the TV for an extended period of time, it is recommended to disconnect the power plug from the wall power outlet. Note When the TV is powered on, an on screen display will indicate the active input source for a few moments. If a signal is not detected at that input, "No Signal" will be displayed on the screen. If you plug in a USB or wifi, please wait for about 4 seconds to power indication start blinking. Choose the menu language Select the language that will be used for displaying system menus and messages as part of the initial TV setup. 1 Choose the TV input and then press the MENU EN-15 Haier LED HDTV button. 2 Press the / buttons to select the Function menu. 3 Press the/ ENTER button and then use the / buttons to select Language. 4 Press the/button to select a language (English, Español or Français). Video Audio Channel Language Aspect Ratio OSD Timeout DPMS CEC Setup Menu DCR English Normal Long On Off Lock Enter Move Exit Choose the Input source Change the active input source to watch TV, or to watch other devices that are connected to your TV (e.g., VCR, DVD player, cable box). f Press the INPUT button once to see the Input Source display. Continue to press the INPUT button until the input source that you want is active (e.g., HDMI1, Component, Video, VGA). Select the desired program 1 Using the CH / buttons. Press the CH button to tune to a higher channel. Press the CH button to tune to a lower channel. 2 You can also tune to a channel directly by entering the channel number using the number pad on the remote control and then pressing ENTER. Note If skip is set to ON for a channel, pressing the CH / buttons will not show the skipped channel(s). Select the desired volume level Press the VOL-/+ buttons on the remote or on the side of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.