Haier LSE-1200 Instruction Manual - Page 9
Other functions, Installation
View all Haier LSE-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Other functions 1. Power off memory function: In case there is power breakdown or the plug accidentally falls out of the outlet when the machine is in operation, this machine can memorize the running of the program so that it continues with its work after the resume of power. 2. The machine can memorize the preset condition of precious washing, which means it can memorize the habit of the user in washing clothes. You can just press the button "start/pause" to begin washing or re-set the program before operating. 3. keyboard-locking function After starting the program, press the buttons "reserve" and "start/pause" at one time for about 3seconds and the keyboard-locking function is started up. In this condition, pressing any other function keys or turning any knobs, resulting in suggestive sound, won't change the program. Press the buttons "reserve" and "start/pause" at one time again for about 3seconds and the keyboard-locking function is closed. 4. Cancel the program or choose another program as well as other accessional functions when the machine is in operation (the keyboard-locking function closed) A. Turn the program knot to the position of turning off, and the program automatically stops; turn the knot again to choose new program. B. If some accessional functions need to be chosen when the program is at work, press the button "start/pause". After choosing the accessional functions press the same button again. Note: Refer to the program setting guide for information concerning functions attachable to different programs. 5. After the completion of the whole program, this machine provides a short piece of enjoyable music, reminding you of the finish of the washing process. Just open the door of the machine to take out your clean clothes. Installation 1. Place the threaded end of the water inlet hose on the water inlet valve connector. threaded end of 2. Check that the connection is correct by tightening the threaded end on the connector. Positioning the drainage hose water inlet valve connector · The free end must be at a height of between 80 and 100 cm. The drainage hose must be fastened on the rear panel with the retaining clip. · Fix the drainage hose in the correct position with the support supplied. It is inadvisable to lengthen the hose; if necessary, contact the Service Centre. The extension must not exceed 250 cm in length (an overlong extension could cause the water to drain while the washing machine is still loading). The diameter of the extension hose must be the same as that of the original drainage hose. Note: the free end must not be immersed in water. Connect the drainage hose securely in order to prevent leakage. Connection of power supply Check the following items before connection to the power supply. · whether the socket is able to support the washing machine's maximum load (the socket and the power cable must be able to support a maximum current of no less than 15A). · whether the mains voltage conforms to the required value. · if the power socket to which the washing machine is connected is not the same as the plug, replace it with a suitable one; alternatively, consult a specialised engineer or the Service Centre for a suitable socket. The washing machine must be correctly earthed. · the supplementary earth cable is not necessary if the power socket is earthed. · the supplementary earth cable is installed at the top of the rear panel of the washing machine and earthed if the power supply socket has no earth connection. Note: do not connect the supplementary earth cable to the water hose or heating pipe.