Haier M1000 User Manual - Page 33
Big picture - modem setup
View all Haier M1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Windows 2000 Operating System as an example: 1.Connect one end of the serial data cable (refer to accessories) to port COM1 (or COM2) port of the PC and the other end into the bottom of the phone. 2.Select the 'add new modem' option from the Control Panel and select a standard modem type with a standard 28800 bps. 3.In the advanced settings, add an extra initialization command as at+cgdcont=1, "IP", "cmnet"; enter "Change default first " option and change the "flow control" to "non" in the "first data connection" option of routine setup. 4.In the Modem configuration, the maximum rate is 115200. Cancel the "run hardware flow control" in "hardware function". 5.Select com1 (or com2) to be used by the serial cable. 6.Set the port (where the modem is connected to) speed at 115200. 7.Set the network dial-up number and simply dial the number. To use GPRS network: If you have subscribed to GPRS service, you should set the network dial-up number as: *98* 1 #(which does not require a user ID and password). To use non-GPRS network: A China Mobile subscriber should set the network dial-up number as 17201 (the user ID is 172 and password is 172). 2.9 Big picture You can associate a picture not bigger than 128*128 with a name card in your phonebook. When you receive a call from a number in your record associated with a picture, the picture will be displayed on the screen as a background 29