Haier QGAS740RMSS Use and Care Manual - Page 8
Using The Range
View all Haier QGAS740RMSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ENGLISH USING THE RANGE IN CASE OF A POWER FAILURE In the event of a power failure, the oven is inoperable and no attempt should be made to operate it. However, the surface burners may be lit with a match. Using extreme caution, hold a lit match near the ports beneath the surface burner cap, then slowly turn the knob to the LITE position. Once lit, surface burners will continue to operate normally. SURFACE BURNERS Lighting a Surface Burner WARNING Burners should be operated only when covered by cookware. Burner flames not covered by cookware present a risk of fire or clothing ignition. Never let flames extend beyond the sides of the cookware. Failure to comply may result in serious injury. Make sure all burners are in their correct locations and fully assembled before attempting to operate any burner. Select a burner and find its control knob. Push the knob in and turn it to the LITE position. You will hear a clicking noise-the sound of the electric spark igniting the burner. When one burner is turned to LITE, all burners will spark. Sparking will continue as long as the knob remains at LITE. Once gas is ignited, turn the knob to adjust the flame size. Using the Surface Burners NOTES: • Do not operate the burner for an extended period of time without cookware on the grate. The finish on the grate may discolor or chip without cookware to absorb the heat. • Do not attempt to disassemble any burner while another burner is on. Damage to the product may occur. • Be sure the burners and grates are cool before you place your hand, a pot holder or cleaning materials on them. Your rangetop has sealed gas burners that offer convenience, cleanability and flexibility for a wide range of cooking applications. The smallest burner is the simmer burner. A simmer burner turned down to LO provides precise cooking performance for foods such as delicate sauces that require low heat for a long cooking time. Surface Burner The round burner is for general cooking purposes. Size cookware appropriately to the flames. Push the control knob in and turn it to the LITE position. Selecting a Flame Size Watch the flame, not the knob, as you adjust heat. When rapid heating is desired, the flame size should match the size of the cookware you are using. Flames larger than the bottom of the cookware will not heat faster and may be hazardous. These flames are too large for the pot 8 49-85252-1