Haier QGSS740BNTS LP Conversion Kit - Page 2

Converting The Oven Burners, Additional Information, Adjusting Low Flame Setting, On Cooktop Burners

Page 2 highlights

CONVERTING THE OVEN BURNERS NOTICE: This product cannot be converted to propane by adjusting WKHRYHQRUL¿FHV7KHRUL¿FHVPXVWEHUHSODFHGIRU propane. BAKE BURNER ORIFICE Lift Burner %DNH%XUQHU2UL¿FH 1. Remove oven racks, door and oven bottom. Remove the 1/4" hex screws securing the bake burner.  7 KHEDNHEXUQHURUL¿FHLVRQWKHJDVYDOYHORFDWHGEHKLQG WKHZDUPLQJGUDZHU/LIWWKHEXUQHURႇWKHRUL¿FHDQGDSSO\ D´VRFNHWRQDQH[WHQVLRQWRWKHKH[EDVHRIWKHRUL¿FH RQWKHJDVYDOYH/RRVHQWKHRUL¿FHE\WXUQLQJFRXQWHU clockwise and remove. ADJUSTING AIR SHUTTER SETTINGS FOR OVEN BURNERS ADJUSTING LOW FLAME SETTING ON COOKTOP BURNERS The air shutters should be turned to the marked settings NG or propane or set according to the following table. BURNER Bake Broil AIR SHUTTER SETTING FOR PROPANE Full open 0.690" AIR SHUTTER SETTING FOR NG 0.280" 0.690" 1. With a Phillips head screwdriver, loosen the screws securing the air shutter on the bake burner. Adjust the air shutter to the dimension given in the above table. 2. Turn on the gas. 3. Turn on the electricity. 4. Reinstall the oven door. Screw Air shutter 5. Turn on the bake burner. 2YHQEXUQHUÀDPHPXVWEHREVHUYHGZLWKWKHGRRUFORVHG WRSURSHUO\FKHFNÀDPHFKDUDFWHULVWLFV  $V\RXZDWFKWKHÀDPHZLWKWKHRYHQGRRUFORVHGFKHFN the following through the oven door window.  D)RU1DWXUDO*DVLIWKHÀDPHVDUH\HOORZRSHQWKHDLU shutter more.  E,IWKHÀDPHVEORZDZD\RUÀXWWHUIURPWKHEXUQHUFORVH the air shutter slightly.  7XUQEDNHEXUQHURႇDQGUHSHDWZLWKEURLOEXUQHU Low setting adjustments must be made with other burners in operation on a medium setting. This procedure prevents the ORZÀDPHIURPEHLQJVHWWRRORZUHVXOWLQJLQWKHÀDPHEHLQJ extinguished when other burners are turned on. A. Turn on all surface burners to medium setting. % 7XUQWKHNQRERQWKHEXUQHUEHLQJDGMXVWHGWR³/2´ & 5HPRYHWKHNQREDQGLQVHUWDVPDOOÀDWEODGHVFUHZGULYHU into the valve shaft and/or side adjustment screw(s) as shown and turn clockwise to fully tighten down the bypass screw(s). Repeat for all valves. ' ,IÀDPHDSSHDUVWRRORZRUXQVWDEOHVORZO\WXUQE\SDVV VFUHZFRXQWHUFORFNZLVHXQWLODVWDEOHÀDPHH[LVWVIRUHDFK burner. Remember, other burners must be turned on to medium. E. Additionally, for each burner being adjusted, quickly open DQGFORVHWKHRYHQGRRUZKLOHREVHUYLQJÀDPH,IÀDPHLV extinguished, continue adjusting bypass screw for a larger ÀDPH5HSHDWGRRURSHQLQJVXQWLOÀDPHLVVWDEOH F. Replace the knob. NOTICE: 6DYHWKHVHRUL¿FHVIRUIXWXUHFRQYHUVLRQEDFNWRQDWXUDOJDV  6 HOHFWWKHSURSDQHEDNHRUL¿FHIURPWKHNLWDQGLQVWDOOLWRQ the gas valve. Tighten until snug. BROIL BURNER ORIFICE Broil 2UL¿FH Oven Light 1. Remove the 1/4" hex screw securing the broil burner and DOORZLWWRKDQJGRZQIUHHRIWKHEURLORUL¿FH  $ SSO\D´ZUHQFKWRWKHKH[EDVHRIWKHRUL¿FH/RRVHQ WKHRUL¿FHE\WXUQLQJFRXQWHUFORFNZLVHDQGUHPRYH  6 HOHFWWKHSURSDQHEURLORUL¿FHIURPWKHNLWDQGLQVWDOOLWRQ the broil elbow. Tighten until snug.  5 HSODFHWKHEURLOEXUQHURYHUWKHRUL¿FHDQGUHSODFHWKH screw securing the burner. WARNING If you attempt to measure the inner cone RIWKHÀDPHSOHDVHXVHFDXWLRQEXUQVFRXOGUHVXOW  &KHFNLQJWKHÀDPHVL]H It should be approximately 1/2" to 3/4" long for the bake and broil burners. The combustion quality of the EXUQHUÀDPHVQHHGVWREHGHWHUPLQHGYLVXDOO\ 127(,IEXUQHUÀDPHVORRNOLNH $ IXUWKHUDLUVKXWWHU adjustment to the bake buner is required. Normal EXUQHUÀDPHVVKRXOGORRNOLNH % RU & GHSHQGLQJ on the type of gas you use. With propane gas, some yellow tipping on the outer cones is normal. (A) Yellow flames: Further Adjustment Required (B) Yellow tips on outer cones: Normal for Propane Gas (C) Soft blue flames: Normal for Natural Gas )RUHLJQSDUWLFOHVLQWKHJDVOLQHPD\FDXVHDQRUDQJHÀDPHDW ¿UVWEXWWKLVZLOOVRRQGLVDSSHDU 9. When all adjustments are made and the results are satisfactory: a. Retighten the air shutter screws. b. Replace the oven bottom. c. Replace the storage drawer. Center adjustment screw SPECIAL NOTE: To convert the oven back to natural gas, reverse the instructions given in making propane adjustments. NOTICE: 2QFHWKHFRQYHUVLRQLVFRPSOHWHDQGFRQ¿UPHG¿OORXW the propane sticker and include your name, organization and date conversion was made. Apply the sticker to the range near the regulator to alert others in the future that this appliance has been converted to propane. If converting back to natural gas from propane, please remove the sticker so others know the appliance is set to use natural gas. ADDITIONAL INFORMATION BURNER OUTPUT RATINGS: BTU/HR NG (Natural) Gas 5" W.C.P. BTU ORIFICE BURNER RATE SIZE (in) COLOR MARKING LF 15,000 0.070 Brown 178N LR 5,000 0.040 White/Purple 101N RF 15,000 0.070 Brown 178N RR 9,500 0.0555 Yellow 141N Broil 16,500 0.071 Black/Blue 071N Bake 16,000 0.070 none 50 198 N III Denotes 1.98mm Orifice size opening Denotes Natural Gas PROPANE CONVERSION INSTRUCTIONS 31-2000678 Rev. 0 01-20 GEA QGSS740

  • 1
  • 2

Broil
Oven
Light
Low setting adjustments must be made with other burners in
operation on a medium setting. This procedure prevents the
extinguished when other burners are turned on.
A. Turn on all surface burners to medium setting.
into the valve shaft and/or side adjustment screw(s) as
shown and turn clockwise to fully tighten down the bypass
screw(s). Repeat for all valves.
burner. Remember, other burners must be turned on to
medium.
E.
Additionally, for each burner being adjusted, quickly open
extinguished, continue adjusting bypass screw for a larger
F.
Replace the knob.
CONVERTING THE OVEN BURNERS
ADDITIONAL INFORMATION
BAKE BURNER ORIFICE
1.
Remove oven racks, door and oven bottom. Remove the
1/4” hex screws securing the bake burner.
clockwise and remove.
the gas valve. Tighten until snug.
BROIL BURNER ORIFICE
1.
Remove the 1/4” hex screw securing the broil burner and
the broil elbow. Tighten until snug.
screw securing the burner.
Lift
Burner
ADJUSTING LOW FLAME SETTING
ON COOKTOP BURNERS
SPECIAL NOTE:
To convert the oven back to natural gas, reverse the
instructions given in making propane adjustments.
NOTICE:
This product cannot be converted to propane by adjusting
propane.
NOTICE:
the propane sticker and include your name, organization
and date conversion was made. Apply the sticker to
the range near the regulator to alert others in the future
that this appliance has been converted to propane. If
converting back to natural gas from propane, please
remove the sticker so others know the appliance is set to
use natural gas.
NOTICE:
BURNER OUTPUT RATINGS: BTU/HR
NG (Natural) Gas 5” W.C.P.
BURNER
BTU
RATE
ORIFICE
SIZE (in)
COLOR
MARKING
LF
15,000
0.070
Brown
178N
LR
5,000
0.040
White/Purple
101N
RF
15,000
0.070
Brown
178N
RR
9,500
0.0555
Yellow
141N
Broil
16,500
0.071
Black/Blue
071N
Bake
16,000
0.070
none
50
PROPANE CONVERSION INSTRUCTIONS
31-2000678
Rev. 0
01-20
GEA
QGSS740
198
III
Denotes 1.98mm Orifice size opening
Denotes Natural Gas
N
ADJUSTING AIR SHUTTER SETTINGS
FOR OVEN BURNERS
1.
With a Phillips head screwdriver, loosen the screws
securing the air shutter on the bake burner. Adjust the air
shutter to the dimension given in the above table.
2. Turn on the gas.
3. Turn on the electricity.
4. Reinstall the oven door.
5. Turn on the bake burner.
the following through the oven door window.
shutter more.
the air shutter slightly.
It should be approximately 1/2”
to 3/4” long for the bake and broil
burners.
The combustion quality of the
adjustment to the bake buner is required. Normal
on the type of gas you use. With propane gas, some
yellow tipping on the outer cones is normal.
9.
When all adjustments are made and the results are
satisfactory:
a. Retighten the air shutter screws.
b. Replace the oven bottom.
c. Replace the storage drawer.
WARNING
If you attempt to measure the inner cone
(A) Yellow flames:
Further Adjustment
Required
(B) Yellow tips on
outer cones:
Normal for Propane Gas
(C) Soft blue flames:
Normal for Natural Gas
The air shutters should be turned to the marked settings NG or
propane or set according to the following table.
BURNER
AIR SHUTTER
SETTING FOR PROPANE
AIR SHUTTER
SETTING FOR NG
Bake
Full open
0.280”
Broil
0.690”
0.690”
Center adjustment screw
Screw
Air shutter