Haier RBFS21TIAS User Manual - Page 8
Connecting the Water Supply Line
View all Haier RBFS21TIAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting the Water Supply Line Install the stopping valve on the drinking pipe that is frequently used recently. 1. Turn off the main water supplying pipe routine Turn on the nearest tap till the water pipe is cleaned completely. 2. Choose the position of the valve. Choose a position for the valve that is easy to be approached. It is recommended that the valve is connected to the side of a vertical water pipe, and if it is really needed to connect the valve to a level water pipe, connect it to the upside of the water pipe not the downside, in case the sediment may flow out from the water pipe. 3. The hole of the drill valve Drill a hole of 1/4 inches on the water pipe using a sharp drill (even using an automatic valve). Clean the burr left on the water pipe by the drill. 1RWOHWWKHZDWHUÀRZLQWRWKHGULOO 4.Tighten the stopping valve. Tighten the stopping valve on the cold water pipe using a pipe nip. Follow the UXOHVVSHFL¿HGLQWKH&05RI0DVVDFKXVHWWV)HGHUDO3LSLQJ6WDQGDUG6DGGOH backed is unlawful in Massachusetts and is forbidden. Please consult the plumber's mate with working license. 5. Tighten the pipe tip. 7LJKWHQWKHEROWVRIWKHSLSHWLSWLOOWKHFORVLQJFLUFOHEHJLQVWRH[SDQG Don't let the bolts of the pipe tip be too tight, otherwise the water pipe is pressed ÀDW 6. The deposing line of the pipe The deposing line between the cold water pipe and the refrigerator 'ULOODKROHRQWKHZDOORURQWKHÀRRUWKDWLVQHDUWKHZDOOWRDJUHDWGHJUHHDQGOHW the pipe line go through the hole. Assure the pipe has an enough margin area( about 8 inches [2.4 meters] and make it be three circles with the diameter of each circle about 10inches[25 centimeters], and after this installment is done, the refrigerator can be moved away from the wall. 7