Haier RDE350AW User Manual - Page 23

Timed Dry Cycle - won t start

Page 23 highlights

TIMED DRY CYCLE English Timed Dry 120 min Air Fluff 90 min 60 min 30 min Automatic Super Capacity 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. If Start/Pause button is not pressed five minutes after powering on, the dryer will automatically return to OFF status. 2. Set the cycle select dial to Timed Dry Cycle. 3. There are 4 preprogrammed times to choose from 30,60,90 and 120 minutes. 4. When starting the machine close the door first, then press the start/pause button. If a pause is needed during drying, press this button. Pressing again will resume operation. 5. Regardless of the dryer status (drying, pause or cool down), by turning the dial to "OFF" position, the off indicator light will flash for 5 seconds and then go into stand by mode. When machine running, by turning the dial in any direction, the cycle will automatically turn "OFF". 6. After press "Start/Pause" button when machine running, you can choose any cycle as you like. Note: To change the cycle press pause, turn dial to new selection and press "Start/Pause" again. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

22
English
1. Turn the knob to any program except “OFF” to power on. The control panel
will beep once and the dryer will change from “OFF” to the operating status.
If Start/Pause button is not pressed five minutes after powering on, the dryer
will automatically return to OFF status.
2. Set the cycle select dial to Timed Dry Cycle.
3. There are 4 preprogrammed times to choose from 30,60,90 and 120
minutes.
4. When starting the machine close the door first, then press the start/pause
button. If a pause is needed during drying, press this button. Pressing again
will resume operation.
TIMED DRY CYCLE
Air Fluff
120 min
90 min
60 min
30 min
Timed Dry
Automatic
Super Capacity
5. Regardless of the dryer status (drying, pause or cool down), by turning the
dial to "OFF"
position, the off indicator light will flash for 5 seconds and
then go into stand by mode. When machine running, by turning the dial in
any direction, the cycle will automatically turn "OFF".
6. After press “Start/Pause” button when machine running, you can choose any
cycle as you like.
Note: To change the cycle press pause, turn dial to new selection and press
“Start/Pause” again.