Haier RDG350AW User Manual - Page 22
Auto Dry Cycle
View all Haier RDG350AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English AUTO DRY CYCLE 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. 2. Set the cycle select dial to required auto dry cycle. The temperature level is preprogrammed. To change this setting: • Press the "Temp" button to set a suitable drying temperature. • After powering on and selecting the cycle, the dryer selects the pre programmed temperature. If a different drying temperature is required, press the "Temp" button to select. There are three available drying temperatures: High, medium, Low. • "Temp" in the "Heavy Duty" cycle is "High". This can not be change. "Temp" in the "Delicate" cycle is "Low". This can not change; "Temp" in the "Normal" cycle can be choosen from "High, Medium, Low". • Press Start/Pause button. • When starting the machine, close the door first, then press this button. • If a pause is needed during drying, press this button. Pressing again will resume operation. • Regardless of the dryer status (drying, pause or cool down), by turning the dial to "OFF" position, the off indicator light will flash for 5 seconds and then go into stand by mode. When machine running, by turning the dial in any direction, the cycle will automatically turn "OFF". • After press "Start/Pause" button when machine running, you can choose any cycle as you like. Note: To change the cycle press pause, turn dial to new selection and press "Start/Pause" again. 21