Haier WN600 User Manual - Page 17
Solution to Problems
View all Haier WN600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Solution to Problems Even though your washing machine has been carefully designed and constructed, something could still go a miss with your machine. Before rushing to phone one of our service centres, however, please check that the operations listed below have been carried out. In many cases you will save time, money and bother. Our statistics show that many of the calls received by our service centres could have been avoided with just a little more attention. The washing machine won't start Check that: the plug is pushed right into the mains socket; the door is closed tightly: the "ON/OFF" button has been pressed. The washing Check that: machine won't the tap is open and properly connected to the inlet fill with water pipe; the inlet pipe is not bent. The machine Check that: fills and drains the drain pipe is placed at least 80 cm/32 inches continuously above ground level. The machine Check that: will not drain the drain pipe is not blocked; drain the water the drain pipe is not connected at a height more than 1 metre/40 inches above ground level. There is too much foam in the tub Check that: the detergent being used is meant for automatic machines and not for washing by hand; that the amount used is that shown in this manual and not more. 16