Haier WQP12-AFM User Manual - Page 5
Energy Saving Tips, How to Keep Your Dishwasher in Shape, Wash Cycle Table - parts
View all Haier WQP12-AFM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Energy Saving Tips - It is important to try and run the dishwasher when it is fully loaded to save on enery.In order to prevent odors from forming and food from caking onto the dishes,you can run the hold cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are. - Use the right amount of detergent: if you use too much detergent, the result will not be cleaner dishes,but,rather,a greater nega tive impact on the enviroment. - There is no untility in rinsing dishes ,cookware and untensils before placing them in the dishwasher. How to Keep Your Dishwasher in Shape After Every Wash After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside. Moving the Appliance If the appliance must be moved,try to keep it in the vertical position. If absolutely necessarty,it can be positioned on its back. Remove the Plug Before cleaning or performing maintenance, always remove the plug from the socket.Do not run risks. Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.Periodic cleaning with a sponge will prevent this from occuring. No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products.Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar,or a cleaning product made specifically for dishwasher. When You Go on Holiday When You Go on Holiday,it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket ,turn off the water supply and leave the door of the appliance slightly ajar.This will help the seals last longer and prevent odors from forming within the appliance. .7. GB Wash Cycle Table Cycle Normal Wash Normal Wash Light Wash Eco Button RAPID Button Cycle Selection Information Description of Cycle Very dirty dishes,pots and pans.(not to be used with delicate items) Normally dirty dishes,pots and pans.Standard daily cycle. Pre-wash with hot water. Extended wash at 65 K Rinse with cold water. Rinse with hot waterK Drying. Pre-wash with cold water. Extended wash at 55 K Rinse with cold water. Rinse with hot waterK Drying. Deter- Rinse gent Aid 30g 30g Extended wash at 65 K Normally dirty dishes,pots Rinse with cold water. 25g and pans without driedon Rinse with hot waterK residue. Drying. Light Wash (IEC-EN50242) Normally dirty dishes,pots Extended wash at 55 K and pans without driedon Rinse with cold water. 25g residue. Rinse with hot waterK Drying. Rinse Glassware Glassware Soak For dishes that need to be rinsed and dtied only. Rinse with cold water. Rinse with hot waterK Drying. Economic,fast cycle to be Wash at 50 K used for items which are sen- Hot RinseK 15g sitive to hifger.Run immedi- Drying. ately after dishes are used. Economic,fast cycle to be used for items which are sen- Wash at 50 K 15g sitive to hifger.Run immedi- Rinse with cold water. ately after dishes are used. Pre-wash of dishes, pots and pans while waiting for the load to be conmplete after the sub- Short cold wash to prevent food residue from drying on the dishes K sequent meal. GB .8.